log inhelp

 | 

  • If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • You already know Dokkio is an AI-powered assistant to organize & manage your digital files & messages. Very soon, Dokkio will support Outlook as well as One Drive. Check it out today!

View
 

Bootloader V3

Page history last edited by MrTundraMan 10 years, 6 months ago

Bootloader Loader Version 3

 

I have already made two different bootloader loaders (MyISPShield, ISP Shield). So why make a third? Because, the other two tie up an Arduino UNO. Not all that big of a deal since they are pretty cheap, but why not free up the UNO for other prototyping uses?

 

This is a three board set that when put together creates a bootloader loader board. The boards are:

 

 

The ATPRogHead Board acts as a daughterboard (or Shield) to the GVSDuino main (lower) board. The GVSDuino board is an Arduino UNO clone with significant differences. GVSDuino has no built in USB interface so it requires an external cable or board like the FTDI-USB-TTL board.

 

Power comes from the FTDI-USB-TTL board.

 

If you want to see someone who is really doing this right, check out this site.

Comments (0)

You don't have permission to comment on this page.

Printable version